Topcon Pocket-3D User Manual

Importing/Exporting Alignment Files
P/N 7010-0628
2-59
Figure 2-79. Import Surface Files Via Site-Link
Importing/Exporting Alignment
Files Via Site-Link
To export-import alignment files via Site-Link, do the following:
1. Press DataAlignmentImport/ExportVia Site-Link
(
Figure 2-80).
Figure 2-80. Export-Import Alignment Files Via Site-Link
2. On the Surfaces dialog box (Figure 2-81), highlight to select a
specific surface file for the alignment, then press Next to display
the import alignment files To: dialog box (
Figure 2-81).

Topcon Pocket-3D Specifications

General

Brand	Topcon
Model	Pocket-3D
Category	Receiver
Language	English