wolke m600 basic - Label Settings; Fig. 7_201: Label Settings

Label
116 Manual m600 basic 2.6_01
7
Label settings Basic settings configured for the print label in question.
Fig. 7_201: Label settings
The settings made here are always specifically for the active print label
only (lbl. file).
The following notes and instructions on creating labels must be observed:
• Different label settings for each print file
If different print settings are to apply to each print label, the "Settings/La-
bel" menu has to be readjusted for each label.
• Same label settings for each print file
If the "label" settings for a new print label are to stay the same or be the
same as an earlier label, an existing file has to be opened which contains
the required settings. The "Save as" menu opens to show this label under a
new name, with the label settings and contents of the previously opened la-
bel being retained. The contents of the label can now be edited or modified.
7.5 Label settings
NOTE
All dimensions given in the menu are in mm.