wolke m600 basic - Input 1; Fig. 6_84: Installation > I;O; Fig. 6_85: External Input 1

Settings
Manual m600 basic 2.6_01 53
6
I/OIn addition to the inputs for the two photoelectric cells on the two print
heads, the m600 basic also comes with four additional parameterizable
digital inputs. These four inputs come out at the 24 V I/O socket.
Fig. 6_84: Installation > I/O
Input 1
Fig. 6_85: External input 1
Start sensor 1
The effect of selecting "Start sensor" is that the external input 1 is evalu-
ated for the trigger signal (start signal) for print head 1 instead of the pho-
toelectric cell on print head 1. The m600 basic reacts to the rising edge.
Activate m600 basic
Selecting "Activate m600 basic" means that input 1 can be used to acti-
vate the m600 basic via an external signal (e. g. PLC). The function is trig-
gered with a falling edge. The green "Start key" remains in operation.
Reset spit timer:
By selecting "Reset spit timer", the external input 1 can be used to reset
the automatic spitting process. The m600 basic reacts to the rising edge.
6.2.2 I/O
6.2.2.1 Input 1