wolke m600 basic - Fig. 7_118: 2-Head Label

Label
Manual m600 basic 2.6_01 73
7
Design of labelsA field always commences on the upper left-hand edge of a label. The po-
sition of a field is determined by the X position and the Y position (see
Fig. 7_118).
• X=0: Field 1 is directly placed on the left-hand edge of the label.
• X=5: Field 2 is offset to the right by 5 mm.
• Y=0: Field 1 is directly placed on the upper edge of the label.
• Y=5: Field 2 is offset downwards by 5 mm.
The size of a field is defined via the font size and the volume of its contents
(number of characters, size of bitmap, scaling of a barcode etc.).
Fig. 7_118: 2-head label
7.2 Design of labels
field 1
field 2