wolke m600 basic - Fig. 7_216: Label Parameter - Limited Output; Fig. 7_217: Label Parameter - Number Limited

Label
126 Manual m600 basic 2.6_01
7
Limited output
The limited output function is for either measuring the consumption of ink
or for use as a simple counting function. Activating this menu item enables
you to print only a limited number of labels (see next section). The counter
does not appear on the print label; the function only counts the number
of triggered prints. Printing stops when the end value has been reached.
The status of the m600 basic changes over to "STOP".
Other
parameters
Fig. 7_216: Label parameter – Limited output
To determine the amount of ink used you have to weight the cartridges
before and after the printing operation.
Number limited
Fig. 7_217: Label parameter – Number limited
 This is for setting how often the label should be printed for a limited
number.