Xerox WorkCentre 6605

Error Troubleshooting
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
2-150
035 717 G3 Receive RTN
Send
In G3 receive, send RTN. Fax Communication Error 035-
717
Retrain signal sent
Job canceled. Sender will try
again.
* Caution screen with [Close]
button
Replace the
Fax Board.
035 718 Receive T1 Time
Out
In receive, T1 timeout. Target Fax is Not Answering 035-
718
T1 timeout, no response from
sender received.
Job canceled. Remote device will
try again.
* Caution screen with [Close]
button
Replace the
Fax Board.
035 720 Not Receive
Ability
Remote device has no
ability to receive.
Fax Communication Error 035-
720
Remote device unable to receive.
Job canceled. Please try again
later. Remote device may be full.
* Caution screen with [Close]
button
Replace the
Fax Board.
035 728 G3 EOL Not
Receive
In G3 image data receive,
cannot receive EOL for 13
sec(default).
Fax Communication Error 035-
728
No end of line signal received
within 13 seconds.
Job canceled. Sender will try
again.
* Caution screen with [Close]
button
Replace the
Fax Board.
035 729 Career Cut Career cut. Fax Communication Error 035-
729
Job canceled.
* Caution screen with [Close]
button
Replace the
Fax Board.
WorkCentre 6605 Error Code List
Chain Link Error Error Details Control Panel Messages
FIP
location