NoteAction
xx1200001332
Unscrew the two attachment screws that
holds the bracket of the DressPack cable
package (if one is fitted), and let it hang
down with the rest of the DressPack cable
package.
4
See Draining the axis-3 gearbox on
page 149.
Begin draining the gearbox.5
Disconnecting the axis-3 and axis-4 motor cables
Use this procedure to disconnect the motor cables on the axis-3 and axis-4 motors.
NoteAction
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
1
xx1200001135
Unscrew the attachment screws and
washers and remove the motor cover.
2
Continues on next page
508 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.8.3 Replacing the axis-3 gearbox
Continued
To Next Page
Loading...
