ABB IRB 6700 - Removing the Cable Harness in the Lower Arm

Removing the cable harness in the lower arm
NoteAction
xx1200001282
Loosen the axis-2 lower arm metal clamp
and the axis-3 lower arm metal clamp loc-
ated on the inside of the lower arm by re-
moving the attachment screws.
Note
The screws are reached from the outside
of the lower arm.
1
xx1300000733
Use caution and pull the cable harness out
of the lower arm.
2
210 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.4.1 Removing the cable harness
Continued