Removing the shaft in the front
NoteAction
xx1200001278
Remove the small VK cover.
Note
It is almost impossible to remove the VK
cover without damage. New VK covers are
needed.
1
xx1200001279
• M16x70 quality steel 8.8-A3F
Unscrew the attachment screw and washer.2
Dismantle and mounting tool:
3HAC028920-001
xx1200001280
Use the dismantle and mounting tool and
pull out the shaft.
3
Continues on next page
3HAC044266-001 Revision: - 345
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.6.1 Replacing spherical roller bearing, link ear
Continued
To Next Page
Loading...
