ABB IRB 6700 - 3.3 Inspection activities

3.3 Inspection activities
3.3.1 Inspecting the oil level in axis-1 gearbox
Location of oil plug
The oil plug through which the oil level is inspected is located as shown in the
figure.
xx1200000950
Tightening torque: 24 Nm
Required tools
NoteArticle numberEquipment
Content is defined in section Standard
toolkit on page 559.
-Standard toolkit
Required consumables
NoteArticle numberConsumables
Information about the oil is found in
Technical reference manual - Lubrica-
tion in gearboxes.
-Lubricating oil
Required documents
Document numberDocument name
3HAC042927-001Technical reference manual - Lubrication in gearboxes
Continues on next page
104 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.3.1 Inspecting the oil level in axis-1 gearbox