ABB IRB 6700 - 2.4 On-site installation

2.4 On-site installation
2.4.1 Lifting robot with fork lift
General
The robot may be moved using a fork lift, provided that available special aids are
used.
This section describes how to attach the fork lift equipment to the robot.
Fork lift device set
The fork lift device set is fitted to the robot as shown in the figure.
A
B
xx1300001602
Fork lift device (4 pcs)A
Hex socket head cap screw M20x60 quality steel 8.8-A3F (2 pcs per fork lift
device)
B
Required equipment
NoteArt. no.Equipment
3HAC047054-002Fork lift device set
Continues on next page
3HAC044266-001 Revision: - 69
© Copyright 2013 ABB. All rights reserved.
2 Installation and commissioning
2.4.1 Lifting robot with fork lift