Always follow these instructions when transporting an ABB robot according to
method 1:
• Always remove the tool before transportation of the robot.
• Always place the robot in the ABB recommended transport position, described
in section Risk of tipping/stability on page 60.
• Always read and follow the instructions in section Pre-installation procedure
on page 52
Method 2
Transportation according to method 2 is approved by ABB, if use of method 1
is not possible.
Always follow these instructions when transporting an ABB robot according to
method 2:
• Always read and follow the instructions in section Securing the robot on
page 67
• Always place the robot in the ABB recommended transport position for robot
with tool, described in sub section Transport position with a transport support
on page 65.
• Always use the recommended transport support described in sub section
Recommended transport support on page 66.
Continues on next page
3HAC044266-001 Revision: - 63
© Copyright 2013 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Robot transportation precautions
Continued
To Next Page
Loading...
