General Information
CAUTION
The use of pluggable transceivers other than those approved and
released by ADVA Optical Networking will result in loss of laser safety
approval for the respective module and entire FSP 3000 C system. Only
approved pluggable transceivers will guarantee the behavior in
conjunction with the module as specified.
To ensure your safety, as well as the warranty, reliability and
compatibility of your FSP 3000 C system, use original ADVA parts and
components only.
l Module and Pluggable Transceiver Compatibility
l Transceiver Type Label
l Handling Pluggable Transceivers
l Electrostatic Discharge Damage Prevention and Warning
l Laser and LED Safety Guidelines and Warnings
Features
l Are field-replaceable and hot swappable, allowing channel modules to be changed
without an interruption to system power.
l Provides great flexibility in configuring and reconfiguring the network at low costs
l Conform to the QSFP MSAstandards
l Compliant with SFF 8679 (QSFP pluggable transceivers only)
l Meet the requirements of valid Laser Eye and Electrical Safety Standards
l May be used interchangeably.
l Comply with international EMC standards
l Meet the RoHSstandard requirements
l Are tested and approved by ADVA Optical Networking.
l Are Class 1 laser products per IEC 60825-1:2014 Ed. 3.0 and/or 21 CFR1040.10 and
1040.11
l Are compliant with IEEE803.3 standards
l Laser and LED Safety Guidelines and Warnings
l Overview
100 FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016)
To Next Page
Loading...
