MP-2B4CT
Features
l Two 100G/200G network DWDM interfaces
l Four 100G Ethernet client interfaces
l Network Modulation: 100G: DP-QPSK, 200G: 16 QAM
l Comprehensive fault and performance monitoring
l Supports facility loopbacks on all external interfaces and terminal loopbacks on client
interfaces
l Is compatible with FSP 3000R7 100G QPSK coherent modules when network is 100G
DP-QPSK with compatible FEC and 100G Ethernet client
l Ultra-fast transient suppression
l Is field replaceable
l Interfaces
l Signal Path
l Handling Modules
l Electrostatic Discharge Damage Prevention and Warning
Interfaces
Client Interface 94
Network Interface 95
l Overview
l Cables
l Pluggable Transceivers
Client Interface
Number of client ports 4
Type of client interface QSFP28
Optical connector Depends on plug type
Protocols 100 GbE
Protocols 100GBASE-R (compliant to IEEE 802.3ba)
FEC 802.3bj
Maximum permissible skew 180 ns
Mapper GMP into ODU4 (per G.798)
Loop functionality Terminal and facility loop
Table 41: 100G Ethernet Client
94 FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016)
To Next Page
Loading...
