General Installation and Maintenance Guidelines
Chapter 41
Installation Safety Guidelines and
Warnings
General Installation and Maintenance Guidelines 333
Shelf Lifting and Moving Guidelines 334
Handling Equipment Precautions and Guidelines 334
Installation Instructions Warning 339
Rack-Mounting Requirements and Warnings 339
General Installation and Maintenance
Guidelines
To prevent equipment damage, use these guidelines when installing and maintaining the
FSP 3000 C equipment:
l Do not install a shelf in dusty environments or near equipment with strong
electromagnetic characteristics. In the latter case, external interferences could affect
the shelf operation.
l Mount the FSP 3000 C shelf in an approved rack that is fastened on a stable non-
combustible surface.
l Place equipment on a stable service. Any component can fall and break if placed on an
unstable cart, stand, or table.
l Any empty slot in the shelf must be covered with a slot cover to maintain proper
cooling and maintain EMI compliance.
l Handle fiber with extreme care. Avoid mishandling optical fibers, as they can break
and permanent damage may result.
l Do not disassemble this product. Equipment can cease to function and the warranty
will be void if disassembled.
l Never install damaged equipment.
l Electrostatic Discharge Damage Prevention and Warning
l Handling Equipment Precautions and Guidelines
l General Site Requirements
l Supported Rack Requirements
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 333
To Next Page
Loading...