Adva FSP 3000 - Pluggable Transceivers; Signal Path

MP-2B4CT
Pluggable Transceivers
Interface specification depends on the QSFP transceiver used. For details about the
individual transceiver types, see Pluggable Transceivers.
Interface Type Transceiver
Client
AOC QSFP28/112G/AOC/xxxx
LR4 QSFP28/112G/LR4/SM/LC
PSM4 QSFP28/103G/PSM4/SM/MPO
SR4 QSFP28/112G/SR4/MM/MPO
Table 44: Supported QSFP Pluggable Transceivers
l Pluggable Transceivers
l Handling Pluggable Transceivers
l Electrostatic Discharge Damage Prevention and Warning
Signal Path
The following figure provides a simplified functional block diagram illustrating the MP-
2B4CT signal path.
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 97