General Electrical Safety Guidelines and Warnings
PCB Cover Warning
ELECTRIC VOLTAGEWARNING
Risk of hazardous voltage!
Be aware that you may touch live contacts when the PCB cover is
damaged or missing and voltage is applied. Do not install the PSM
if it is damaged or if the covers are missing.
Power Cable Warning
ELECTRIC VOLTAGEWARNING
Risk of fire!
Use only approved and properly rated power cables.
Do not use damaged power cables or cables with damaged power
plugs or wire terminals. Immediately replace damaged plugs or
wire terminals.
Power Source Connection Warning
ELECTRIC VOLTAGEWARNING
1. Ensure that the voltage given on the product safety label
corresponds to that of your power source.
2. Be sure to use the specified power source. Connection to an
improper power source may cause fire or electric shock.
Protective Grounded Equipment Warnings
ELECTRIC VOLTAGEWARNING
The FSP 3000 C is intended to be protective grounded. Ensure that
the FSP 3000 C is connected to earth ground during normal use.
360 FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016)