Adva FSP 3000 - Features; Specifications

QSFP Optical Transceivers
Parameter Value Notes
Maximum cold start transmit
power-up time
10 seconds
Environmental standards
compliance
l Telcordia SR-3580 Level 3 (NEBS)
l ETSI EN 300 019-1-3 Class 3.1
Table 46: General Information — QSFP28/103G/PSM4/SM/MPO
l Module and Pluggable Transceiver Compatibility
l MTBF Hours for FSP 3000 C Equipment
l Handling Pluggable Transceivers
Features
l Supports one bidirectional optical interface with four optical wavelengths (gray)
l Transports one aggregate service via four optical lanes
l Transports four services via four optical lanes
l Overview
l Specifications
l MTBF Hours for FSP 3000 C Equipment
Specifications
Parameter Value Notes
Tx optical power (per lane)
l Minimum: –9.4 dBm
l Maximum:+2.0 dBm
Rxoptical power (per lane)
l Minimum: –12.7 dBm
l Maximum:+2.0 dBm
Supported data rates
l 4x25.78125Gbit/s
(4x25GE)
l 103.125Gbit/s (100GE)
Electrical interface
l CAUI4 (28) for an
aggregate 100GbE
service in
accordance with
IEEE802.3ba/bm
Optical lanes wavelength
l Minimum:1295 nm
l Maximum:1325 nm
Table 47: Specifications — QSFP28/103G/PSM4/SM/MPO
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 105