DC Power Electrical Safety Guidelines and Warnings
ELECTRIC VOLTAGEWARNING
Always remove all power cables when disconnecting from the power
source.
Electric Arc Warning
ELECTRIC VOLTAGEWARNING
Risk of burns due to electric arc.
l Do not connect or disconnect live DC power cables with plugs
to prevent arcing. Turn off DC supply first.
l Securely tighten the captive screws on the DC power plug.
Failure to do so can result in an electrical arc if the connector
plug is accidentally removed.
Electric arc may lead to fire or eye injury.
Electrical Protective Grounding Warnings
ELECTRIC VOLTAGEWARNING
Always connect the protective ground conductor to the protective
ground terminal first when connecting DC power to the equipment.
If power is supplied without the protective grounding, there is a
risk of severe electric shock and personal injury.
ELECTRIC VOLTAGEWARNING
Any interruption of the protective ground conductors, inside or
outside the shelves, or disconnection of the protective ground
terminals, can result in personal injury.
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 365