Adva FSP 3000 - Network Interface

MP-2B4CT
Supported Fault Management(FM)
l PTP: LASER Fail, FTS, LOS
l CTP: LOA, HiBER
l PCS: Local Fault
Supported Performance Monitoring
(PM)
l PTP: OPT, OPR, OPT TCA H/L, OPR
TCA H/L
l CTP: FEC corrected errors, FEC
uncorrected blocks, PreFEC BER
l PCS: PCS Block Errors, PCS BIP
Errors, ES ETH: Bytes, Frames, CRC
Errors, Utilization
Table 41: 100G Ethernet Client
Network Interface
Number of network ports 2
Type of network interface Tunable DWDMinterface
Optical connector LC/PC
Protocols
Proprietary 200G high speed transport
signal
Loop functionality Facility loop
Service/channel density
96 channels at 50 GHz spacing, 128
channels at 37.5 GHz spacing
Tuning range
1528.57 nm (196.100000 THz) to 1567.64
nm (191.23750 THz)
Tuning resolution 6.25 GHz
Frequency stability ±1.8 GHz
Tx optical power range 0 dBm to +6 dBm
Tx optical power accuracy ±1.5 dB
Tx wavelength switching time <60 s
Receiver dynamic range -18 dBm to 0 dBm
OPR measurement range -18.5 dBm to +10.5 dBm
OPR measurement accuracy ±1.5 dB
Protocols OTU4-like 100G transport signal
Modulation DP-QPSK
FEC
l 3 iteration 15% SD FEC (compatible with FSP
3000R7)
l 5 iteration 15% SD FEC
l 5 iteration 25% SD FEC
Table 42: 100G Network Interface
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 95