Adva FSP 3000 - Required Tools and Equipment

Required Tools and Equipment
Figure 55: SH4R Grounding Terminals Location
The signal ground is not supported in this release.
l Grounding — SH12
l Grounding — SH4R
Required Tools and Equipment
l ESD-preventive wrist strap or other personal grounding device
l Suitable grounded surface or a static-dissipative mat
l Appropriate rack size for your installation (customer provided)
l Grounding cable (provided by ADVA Optical Networking
l Grounding terminal and two ground screws (included on shelf)
l Wrench or box spanner (wrench size of 7 mm or 0.276 in.)
l Appropriate screwdriver or wrench to attach the grounding cable to the rack
200 FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016)