Installation Overview — 4U Shelf
Installation Overview — 4U Shelf
In this procedure, 4U shelf refers to the FD-128D. For an installation
overview for the SH4R, see Installation Overview — SH12 and SH4R
Shelves .
When you install a FD-128D, be sure that you follow the installation procedures in the
proper sequence. The following table is an installation procedure checklist, showing the
procedures in the order in which they should occur.
Check Installation Procedure
Unpacking a 4Uor 1UShelf
Inspecting the FSP 3000 C Equipment
Installing the Mounting Brackets on a 4U Shelf
Mounting a 4U or 1U Shelf to a Rack
Installing the FD-128D Front Cover
You will connect the optical cables to the FD-128D in Installation
Overview — SH12 and SH4R Shelves
l Installation Safety Guidelines and Warnings
l Product Safety Labeling
l Service Personnel Assumptions
Installation Overview — 1U Shelf
When you install a 1U shelf (such as the FMT/1HU), be sure that you follow the
installation procedures in the proper sequence. The following table is an installation
procedure checklist, showing the procedures in the order in which they should occur.
Check Installation Procedure
Unpacking a 4Uor 1UShelf
Inspecting the FSP 3000 C Equipment
Installing the Mounting Brackets on a FMT/1HU Shelf
Mounting a 4U or 1U Shelf to a Rack
FSP3000 C Hardware Guide - R1.1 - Issue:A (12/09/2016) 171