12.1 Maintenance and Cleaning
This section contains information about general maintenance and cleaning
of the Network Master.
12.1.1 Maintenance
The Network Master does not require any regular adjustments.
Using the Network Master in a normal environment and under normal
conditions will not call for general maintenance.
WARNING
There are no user-serviceable parts in the Network Master.
Possible service or repair should be performed by Anritsu
authorized personnel only.
12.1.2 Cleaning
From time to time the Network Master needs to be cleaned. The surfaces of
the Network Master can be cleaned with any mild detergent that does not
contain solvents.
Before any cleaning, please take notice of the warnings below:
WARNING
Disconnect the Network Master from the mains power connection
before any cleaning involving fluid.
Only use a soft cloth moisturized with a mild detergent to clean the
surface of the touch screen.
Clean the main power adapter regularly. If dust accumulates around the
power pins, there is a risk of fire.
Keep the cooling fan clean so that the ventilation holes are not
obstructed. If the ventilation is obstructed, the cabinet may overheat and
catch fire.
12.2 Calibration
To Next Page
Loading...
