12.6 Special Information
12.6.1 Equipment Certificate
Anritsu Corporation certifies that this equipment was tested before shipment
using calibrated measuring instruments with direct traceability to public
testing organizations, and was found to meet the published specifications.
12.6.2 Anritsu Warranty
Anritsu Corporation will repair this equipment free-of-charge if a malfunction
occurs within one year after shipment due to a manufacturing fault.
However, software fixes will be made in accordance with the separate
Software End-User License Agreement. Moreover, Anritsu Corporation will
deem this warranty void when:
The fault is outside the scope of the warranty conditions separately
described in the operation manual.
The fault is due to mishandling, misuse, or unauthorized modification or
repair of the equipment by the customer.
The fault is due to severe usage clearly exceeding normal usage.
The fault is due to improper or insufficient maintenance by the customer.
The fault is due to natural disaster, including fire, wind, flooding,
earthquake, lightning strike, or volcanic ash, etc.
The fault is due to damage caused by acts of destruction, including civil
disturbance, riot, or war, etc.
The fault is due to explosion, accident, or breakdown of any other
machinery, facility, or plant, etc.
The fault is due to use of non-specified peripheral or applied equipment
or parts, or consumables, etc.
The fault is due to use of a non-specified power supply or in a non-
specified installation location.
The fault is due to use in unusual environments(Note).
The fault is due to activities or ingress of living organisms, such as
insects, spiders, fungus, pollen, or seeds.
In addition, this warranty is valid only for the original equipment purchaser. It
is not transferable if the equipment is resold.
Anritsu Corporation shall assume no liability for injury or financial loss of the
customer due to the use of or a failure to be able to use this equipment.
Note:
For the purpose of this Warranty, "unusual environments" means use:
In places of direct sunlight
In dusty places
In liquids, such as water, oil, or organic solvents, and medical fluids, or
places where these liquids may adhere
In salty air or in places where chemically active gases (sulfur dioxide,
hydrogen sulfide, chlorine, ammonia, nitrogen dioxide, or hydrogen
chloride etc.) are present
In places where high-intensity static electric charges or electromagnetic
fields are present
In places where abnormal power voltages (high or low) or instantaneous
power failures occur
In places where condensation occurs
In the presence of lubricating oil mists
In places at an altitude of more than 2,000 m
In the presence of frequent vibration or mechanical shock, such as in
cars, ships, or airplanes
To Next Page
Loading...
