12.5 Transporting and Disposal
This section describes the precautions to observe when transporting and
disposing of the main frame at the end of its useful life.
12.5.1 Repackaging
Use the original shipping materials, or an approved optional transit case,
when repacking the unit for transport. Repack according to the following
procedure when the original shipping materials (or a transit case) are not
available.
1. Procure a corrugated cardboard, wooden, or aluminum box large enough
to pack in cushioning material around the unit.
2. Wrap the main frame in some material such as plastic sheeting that will
prevent entry of dust and water.
3. Place the unit into the box.
4. Pack soft materials around the main frame so that it cannot slide around
inside the packing box.
5. Secure the outside of the box with packaging cord, adhesive tape,
bands, or other such implements.
12.5.2 Transporting
In addition to preventing vibration as much as possible, transport under
conditions meeting the storage conditions outlined above.
12.5.3 Disposal
When the Network Master has reached the end of its useful life, dispose of it
in accordance with local environmental regulations. Before disposal,
dismantle or physically destroy any non-volatile memory media in the
Network Master to ensure that data in memory cannot be recovered by third
parties.
12.6 Special Information
To Next Page
Loading...
