via Bluetooth. Login account and password are not required for the FTP
connection. Shared folder in Network Master is "/property/mnt/internal".
When the option is installed, this icon indicates whether the Bluetooth is
enabled or disabled.
Remote Control
Allows you to change remote control options.
SCPI control TCP port: Touch the field to set port number.
GPIB Address: Touch the field to set General Purpose Interface Bus
(GPIB) address.
Enable Remote Reset: Selecting the check box allows users to reset
the Network Master from remote PC.
Incoming remote PC control: If selecting check box, remote PC control
via Ethernet is available.
This icon indicates whether the remote PC control is connected or not.
VNC
Allows remote control of the instrument via Virtual Network Computing (VNC).
This icon indicates whether the VNC is enabled or disabled. Touching this
icon enables or disables the VNC alternately.
File Sharing
Select Share File System to allows to share the data folder on networked
PC.
Selecting Mount Remote Folder enables the parameter fields for
mounting the folder of networked PC.
To Next Page
Loading...
