SIP User's Manual 136 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Contact User
[Account_ContactUser]
Defines the AOR user name. It appears in REGISTER From/To
headers as ContactUser@HostName, and in INVITE/200 OK
Contact headers as ContactUser@<device's IP address>. If not
configured, the 'Contact User' parameter from the 'IP Group Table'
page is used instead.
Note: If registration fails, then the user part in the INVITE Contact
header contains the source party number.
Application Type
[Account_ApplicationType]
Defines the application type:
[0] GW/IP2IP = Gateway and IP-to-IP application (default) (The
IP-to-IP application will be supported in the next applicable
release.)
[2] SBC = SBC application
3.3.2.9.4 Configuring Proxy and Registration Parameters
The 'Proxy & Registration' page allows you to configure the Proxy server and registration
parameters. For a description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 653.
Note: To view whether the device or its endpoints have registered to a SIP
Registrar/Proxy server, see ''Viewing Registration Status'' on page 354.
To Next Page
Loading...
