SIP User's Manual 878 Document #: LTRT-12804
Mediant 800 MSBG
12.15 IP Media Parameters
The IP media parameters are described in the table below.
Table 12-69: IP Media Parameters
Parameter Description
Automatic Gain Control (AGC) Parameters
Web: Enable AGC
EMS: AGC Enable
[EnableAGC]
Activates the AGC mechanism. The AGC mechanism adjusts the
level of the received signal to maintain a steady (configurable)
volume level.
[0] Disable (default).
[1] Enable.
Notes:
This parameter can also be configured per Tel Profile, using the
TelProfile parameter.
For a description of AGC, see Automatic Gain Control (AGC)
on page 646.
Web: AGC Slope
EMS: Gain Slope
[AGCGainSlope]
Determines the AGC convergence rate:
[0] 0 = 0.25 dB/sec
[1] 1 = 0.50 dB/sec
[2] 2 = 0.75 dB/sec
[3] 3 = 1.00 dB/sec (default)
[4] 4 = 1.25 dB/sec
[5] 5 = 1.50 dB/sec
[6] 6 = 1.75 dB/sec
[7] 7 = 2.00 dB/sec
[8] 8 = 2.50 dB/sec
[9] 9 = 3.00 dB/sec
[10] 10 = 3.50 dB/sec
[11] 11 = 4.00 dB/sec
[12] 12 = 4.50 dB/sec
[13] 13 = 5.00 dB/sec
[14] 14 = 5.50 dB/sec
[15] 15 = 6.00 dB/sec
[16] 16 = 7.00 dB/sec
[17] 17 = 8.00 dB/sec
[18] 18 = 9.00 dB/sec
[19] 19 = 10.00 dB/sec
[20] 20 = 11.00 dB/sec
[21] 21 = 12.00 dB/sec
[22] 22 = 13.00 dB/sec
[23] 23 = 14.00 dB/sec
[24] 24 = 15.00 dB/sec
To Next Page
Loading...
