Version 6.2 885 February 2011
SIP User's Manual 13. SIP Software Package
13 SIP Software Package
The table below lists the device's standard SIP software package.
Table 13-1: Software Package
File Name Description
Firmware (RAM CMP) File
MP500_MSBG_SIP_<sw
ver.>.cmp
Image file containing the device's software
ini Configuration Files
MP500_4fxs_4fxo.ini Sample ini file for Mediant 800/4xFXS/4xFXO
MP500_12fxo.ini Sample ini file for Mediant 800/12xFXO
usa_tones_xx.dat Default loadable Call Progress Tones *.dat file
usa_tones_xx.ini Call Progress Tones ini file (used to create *.dat file)
Miscellaneous Files
SNMP MIBs MIB library for SNMP browser
CAS Protocol Files Used for various signaling types, such as E_M_WinkTable.dat
Utilities
DConvert TrunkPack Downloadable Conversion Utility - to create Call Progress
Tones, Voice Prompts, and CAS files
ACSyslog Syslog server
CPTWizard Call Progress Tones Wizard
ISDN Trace Utility Utility that is used to convert ISDN traces to textual form
Notes:
• The ini and Utility files are shipped with the device in CD format.
• The device is supplied with a cmp file pre-installed on its flash memory.
Therefore, this file is not included on the supplied CD. However, if you
are an AudioCodes registered customer, you can obtain the latest cmp
version files (as well as documentation and other software such as the ini
and MIB files, and Utilities) from AudioCodes Web site at
www.audiocodes.com/downloads (customer registration is performed
online at this Web site). If you are not a direct customer of AudioCodes,
please contact the AudioCodes’ Distributor and Reseller from whom this
product was purchased.
To Next Page
Loading...
