AudioCodes Mediant 800 MSBG - Table 9-7: Application Type Parameters

SIP User's Manual 626 Document #: LTRT-12804
Mediant 800 MSBG
Application Traffic / Network Types Class-of-Service (Priority)
Web server (HTTP)
Management Bronze
SNMP GET/SET
Management Bronze
Web server (HTTPS)
Management Bronze
RTP traffic
Media Premium media
RTCP traffic
Media Premium media
T.38 traffic
Media Premium media
SIP
Control Premium control
SIP over TLS (SIPS)
Control Premium control
Syslog
Management Bronze
SNMP Traps
Management Bronze
DNS client
Varies according to DNS settings
(EnableDNSasOAM):
 OAMP
 Control
Depends on traffic type:
 Control: Premium Control
 Management: Bronze
NTP
Varies according to NTP settings
(EnableNTPasOAM):
 OAMP
 Control
Depends on traffic type:
 Control: Premium control
 Management: Bronze
9.5.1.3.3 Applications with Assignable Application Type
Some applications can be associated with different application types in different setups.
These application types are configurable. The applications listed below can be configured
to one of two application types:
 DNS
 NTP
Table 9-7: Application Type Parameters
Parameter Description
EnableDNSasOAM
Determines the application type for DNS services.
 [1] = OAMP (default)
 [0] = Control.
Note: For this parameter to take effect, a device reset is required.
EnableNTPasOAM
Determines the application type for NTP services.
 [1] = OAMP (default)
 [0] = Control.
Note: For this parameter to take effect, a device reset is required.