SIP User's Manual 264 Document #: LTRT-12804
Mediant 800 MSBG
b. Click the Recreate Key button to recreate the public key, or the Refresh button
to refresh the displayed key.
c. Click Close; you are returned to the previous page.
5. Configure the IPSec log display for identifying and analyzing the history of the IPSec
package commands, attempts to create connections, etc:
a. Click the Log Settings button; the following page appears.
Figure 3-175: IPSec Log Settings
b. Select the check boxes relevant to the information you want the IPSec log to
record.
c. Click OK to save the settings.
To Next Page
Loading...
