Version 6.2 657 February 2011
SIP User's Manual 12. Configuration Parameters Reference
12.1.4 NAT Parameters
The Network Address Translation (NAT) parameters are described in the table below.
Table 12-4: NAT Parameters
Parameter Description
Web/EMS: NAT Traversal
[DisableNAT]
Enables or disables the NAT mechanism.
[0] Enable
[1] Disable (default)
Web: NAT IP Address
EMS: Static NAT IP Address
[StaticNatIP]
Global (public) IP address of the device to enable static NAT between
the device and the Internet.
Note: For this parameter to take effect, a device reset is required.
Web/EMS: Inbound Media
Latch Mode
[InboundMediaLatchMode]
Enables or disables the receipt of media streams whose IP
address/port are not configured for the channel.
[0] Strict = Accepts only the media stream configured for the
channel.
[1] Dynamic = Accepts any media stream (default).
To Next Page
Loading...
