SIP User's Manual 106 Document #: LTRT-12804
Mediant 800 MSBG
3.3.2.5.3 Configuring RTP/RTCP Settings
The 'RTP/RTCP Settings' page configures the Real-Time Transport Protocol (RTP) and
Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed description
of the parameters appearing on this page, refer to ''Configuration Parameters Reference''
on page 653.
¾ To configure the RTP/RTCP parameters:
1. Open the 'RTP/RTCP Settings' page (Configuration tab > VoIP menu > Media
submenu > RTP/RTCP Settings).
Figure 3-54: RTP/RTCP Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 336.
To Next Page
Loading...
