AudioCodes Mediant 800 MSBG - Figure 2-15: Adding a Traffic Priority Rule; Figure 2-16: Defining Incoming SIP Ports; Figure 2-17: Defining SIP Ports (E.g. TCP)

SIP User's Manual 36 Document #: LTRT-12804
Mediant 800 MSBG
2. Under the 'QoS Output Rules' table, click the New
button corresponding to the
'WAN Ethernet Rules' rule ID; the following page appears:
Figure 2-15: Adding a Traffic Priority Rule
3. Add a new output traffic rule for VoIP SIP signaling to the WAN:
a. From the 'Protocol' drop-down list, select ‘Show All Services’ to view all protocols
and then select 'SIP'; “SIP” is displayed under the ’Protocol’ group.
b. From the drop-down list appearing below “SIP”, select 'User Defined'; the
following appears.
Figure 2-16: Defining Incoming SIP Ports
c. In the 'Service Name' field, enter the service, and then click New Server Ports;
the following page appears.
Figure 2-17: Defining SIP Ports (e.g. TCP)