SIP User's Manual 68 Document #: LTRT-12804
Mediant 800 MSBG
3.3.1.3 Configuring Syslog Settings
The 'Syslog Settings' page allows you to configure the device's embedded Syslog client.
For a detailed description on the Syslog parameters, see ''Syslog, CDR and Debug
Parameters'' on page 666. Fo
r a detailed description on Syslog messages and using third-
party Syslog servers, refer to the Product Reference Manual.
¾ To configure the Syslog client:
1. Open the 'Syslog Settings' page (Configuration tab > System menu > Syslog
Settings).
Figure 3-27: Syslog Settings Page
2. Configure the parameters as required, and then click the Submit button to apply your
changes.
3. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
To Next Page
Loading...
