SIP User's Manual 112 Document #: LTRT-12804
Mediant 800 MSBG
3.3.2.6 Services
The Services submenu contains the following page item:
LDAP Settings (see ''Configuring LDAP Settings'' on page 112)
3.3.2.6.1 Configuring LDAP Settings
The 'LDAP Settings' page is used for configuring the Lightweight Directory Access Protocol
(LDAP) parameters. For a description of these parameters, see ''Configuration Parameters
Reference'' on page 653.
For an overview of LDAP, see ''Routing Based on LDAP Active
Directory Queries'' on page 605.
¾ To configure the LDAP parameters:
1. Open the 'LDAP Settings' page (Configuration tab > VoIP menu > Services
submenu > LDAP Settings).
Figure 3-60: LDAP Settings Page
The read-only 'LDAP Server Status' field displays one of the following possibilities:
• "Not Applicable"
• "Connection Broken"
• "Connecting"
• "Connected"
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
To Next Page
Loading...
