Version 6.2 217 February 2011
SIP User's Manual 3. Web-Based Management
¾ To configure SAS:
1. Open the 'SAS Configuration' page (Configuration tab > VoIP menu > SAS > Stand
Alone Survivability).
Figure 3-112: SAS Configuration Page
2. Configure the individual parameters as described in SIP Configuration Parameters.
3. Configure the SAS Registration Manipulation table to manipulate the SIP Request-URI
user part of incoming INVITE messages and of incoming REGISTER request AoR (in
the To header), before it is saved to the registered users database.
• Remove From Right: Number of digits removed from the right side of the user
part before saving to the registered user database.
• Leave From Right: Number of digits to retain from the right side of the user part.
Notes:
• Once manipulated, the SAS application searches for the user in the
registration database.
• The SAS Registration Manipulation feature does not modify the Request-
URI of the outgoing INVITE message.
• The SAS Registration Manipulation can also be configured using the
SASRegistrationManipulation ini file parameter (see ''SAS Parameters''
on page 216).
To Next Page
Loading...
