SIP User's Manual 180 Document #: LTRT-12804
Mediant 800 MSBG
¾ To configure the keypad features
1. Open the 'Keypad Features' page (Configuration tab > VoIP menu > GW and IP to
IP submenu > Analog Gateway submenu > Keypad Features).
Figure 3-90: Keypad Features Page
2. Configure the keypad features as required. For a description of these parameters, see
''Configuration Parameters Reference'' on page 653.
3. Click the Submit button to save your
changes.
4. To save the changes to the flash memory, see ''Saving Configuration'' on page 336.
3.3.2.11.5.2 Configuring Metering Tones
The FXS interfaces can generate 12/16 KHz metering pulses toward the Tel side (e.g., for
connection to a pay phone or private meter). Tariff pulse rate is determined according to
the device's Charge Codes table. This capability enables users to define different tariffs
according to the source/destination numbers and the time-of-day. The tariff rate includes
the time interval between the generated pulses and the number of pulses generated on
answer.
To Next Page
Loading...
