SIP User's Manual 354 Document #: LTRT-12804
Mediant 800 MSBG
3.5.2.5 Viewing Call Routing Status
The 'Call Routing Status' page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.
¾ To view the call routing status:
Open the 'Call Routing Status' page (Status & Diagnostics tab > VoIP Status menu
> Call Routing Status).
Figure 3-309: Call Routing Status Page
Table 3-45: Call Routing Status Parameters
Parameter Description
Call-Routing Method
Proxy/GK = Proxy server is used to route calls.
Routing Table = The 'Outbound IP Routing Table' is used to route
calls.
IP Address
Not Used = Proxy server isn't defined.
IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.
State
N/A = Proxy server isn't defined.
OK = Communication with the Proxy server is in order.
Fail = No response from any of the defined Proxies.
3.5.2.6 Viewing Registration Status
The 'Registration Status' page displays whether the device, its endpoints, SIP Accounts,
and BRI endpoints are registered to a SIP Registrar/Proxy server.
To Next Page
Loading...
