AudioCodes Mediant 800 MSBG - SIP Media Realm Parameters

SIP User's Manual 682 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Web: SNMP V3 Table
EMS: SNMP V3 Users
[SNMPUsers]
This ini file table parameter configures SNMP v3 users. The
format of this parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;
[\SNMPUsers]
For example:
SNMPUsers 1 = v3admin1, 1, 0, myauthkey, -, 1;
The example above configures user 'v3admin1' with security
level authNoPriv(2), authentication protocol MD5,
authentication text password 'myauthkey', and
ReadWriteGroup2.
Notes:
 This parameter can include up to 10 indices.
 For a description of this table's individual parameters and
for configuring the table using the Web interface, see
''Configuring SNMP V3 Users'' on page 81.
 For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368
12.7 SIP Media Realm Parameters
The SIP Media Realm parameters are described in the table below.
Table 12-24: SIP Media Realm Parameters
Parameter Description
Web: Default CP Media Realm
Name
EMS: Default Realm Name
[cpDefaultMediaRealmName]
For a description of this parameter, see ''Configuring Media Realms''
on page 109.
Web: SIP Media Realm Table
EMS: Protocol Definition > Media Realm
[CpMediaRealm]
This ini file table parameter configures the SIP Media Realm table.
The Media Realm table allows you to divide a Media-type interface
(defined in the 'Multiple Interface' table) into several realms, where
each realm is specified by a UDP port range.
The format of this parameter is as follows:
[CpMediaRealm]
FORMAT CpMediaRealm_Index =
CpMediaRealm_MediaRealmName, CpMediaRealm_IPv4IF,
CpMediaRealm_IPv6IF, CpMediaRealm_PortRangeStart,
CpMediaRealm_MediaSessionLeg, CpMediaRealm_PortRangeEnd;
[\CpMediaRealm]