SIP User's Manual 314 Document #: LTRT-12804
Mediant 800 MSBG
5. Select the L2TP tab.
Figure 3-261: L2TP Tab
• In the 'L2TP Server Host Name or IP Address' field, enter the connection's host
name or IP address obtained from your ISP.
• In the 'Shared Secret' field, enter the shared secret value obtained from your ISP.
6. Select the Advanced tab to enable the firewall for this network connection (see
''Editing Existing Connections'' on page 328).
3.3.3.9.9 Layer 2 Tunneling Protocol Server (L2TP Server)
The device can act as a Layer 2 Tunneling Protocol Server (L2TP Server), accepting L2TP
client connection requests.
¾ To create an L2TP server:
1. In the 'Connections' page, click the New
icon; the Connection Wizard opens.
2. Select the 'Connect to a Virtual Private Network over the Internet' option, and then
click Next.
Figure 3-262: VPN Connection Type
3. Select the 'VPN Server' option, and then click Next.
Figure 3-263: Selecting L2TP Server VPN Protocol
To Next Page
Loading...
