Version 6.2 259 February 2011
SIP User's Manual 3. Web-Based Management
b. In the 'Name' field, enter a new Tx traffic shaping class name (e.g., Class A), and
then click OK to save the settings; the class is added to the table.
Figure 3-168: Class Name Added to Table
c. Click the newly added class name; the following page appears:
Figure 3-169: Defining Shaping Class
d. Configure the following fields:
♦ Name: Name of the class.
♦ Queue Priority: Priority level of the class (where zero is the highest and
seven the lowest).
♦ Queue Size:
♦ Bandwidth: Reserved transmission bandwidth in kilobits per second. You
can limit the maximum allowed bandwidth by selecting the 'Specify' option
and then defining the Kbits/s.
To Next Page
Loading...
