Version 6.2 355 February 2011
SIP User's Manual 3. Web-Based Management
¾ To view Registration status:
Open the 'Registration Status' page (Status & Diagnostics tab > VoIP Status menu
> Registration Status).
Figure 3-310: Registration Status Page
Registered Per Gateway:
• 'YES' = registration is per device
• 'NO' = registration is not per device
Ports Registration Status:
• 'REGISTERED' = channel is registered
• 'NOT REGISTERED' = channel not registered
Accounts Registration Status: registration status based on the Accounts table
(configured in ''Configuring Account Table'' on page 133):
• Group Type: type of served group - Hunt Group or IP Group
• Group Name: name of the served group, if applicable
• Status: indicates whether or not the group is registered ('Registered' or
'Unregistered')
BRI Phone Number Status:
• Phone Number: phone number of BRI endpoint
• Module/Port: module/port number of BRI endpoint
• Status: indicates whether or not the BRI endpoint is registered ('Registered' or
'Unregistered')
Note: The registration mode (i.e., per device, endpoint, account. or no registration)
is configured in the 'Hunt Group Settings' table (see ''Configuring Hunt Group
Settings'' on page 148) or using the TrunkGroupSettings ini file parameter.
To Next Page
Loading...
