SIP User's Manual 252 Document #: LTRT-12804
Mediant 800 MSBG
3.3.3.3.9 Configuring Advanced Filtering
The Advanced Filtering allows you to assign Access List rules (defined in ''Configuring the
Access List'' on page 249) to the device'
s LAN and/or WAN interfaces.
¾ To assign Access List rules to the device's LAN/WAN interfaces:
1. Click the Advanced Filtering item (Configuration tab > Data menu > Firewall and
ACL submenu > Advanced Filtering); the following page appears listing the device's
LAN/WAN interfaces and a corresponding drop-down list containing the defined
Access list rules (in ''Configuring the Access List'' on page 249):
Figure 3-160: Advanced Filtering
2. From the drop-down list corresponding to the interface to which you want to apply an
Access List rules, select the required Access List group name.
3. Click OK.
3.3.3.4 QoS
The device's Quality of Service (QoS) provides the capability to provide better service to
selected network traffic. This is achieved by shaping the traffic and processing higher
priority traffic before lower priority traffic.
The QoS menu provides the following items:
General QoS (see ''Configuring General QoS Settings'' on page 253)
Match Rules (see '
'Configuring Matching Rules'' on page 253)
Traffic Shapi
ng (see ''Configuring Traffic Shaping'' on page 256)
DSCP Set
tings (see ''Configuring DSCP Settings'' on page 260)
802.1p Setti
ngs (see ''Configuring 802.1p Settings'' on page 262)
To Next Page
Loading...
