AudioCodes Mediant 800 MSBG - Table 3-11: Multiple Interface Table Parameters Description

Version 6.2 85 February 2011
SIP User's Manual 3. Web-Based Management
5. Click Done to validate the interface. If the interface is not valid (e.g., if it overlaps with
another interface in the table or if it does not adhere to the other rules as summarized
in ''Multiple Interface Table Configuration Summary and Guidelines'' on page 627), a
warning message is displayed.
6. Save the changes to flash memory and reset the device (see ''Saving Configuration''
on page 336).
To view net
work interfaces that are currently active, click the IP Interface Status Table
button. For a description of this display, see ''Viewing Active IP Interfaces'' on
page 350.
Table 3-11: Multiple
Interface Table Parameters Description
Parameter Description
Table parameters
Index
Index of each interface.
The range is 0 to 11.
Web: Application Type
EMS: Application Types
[InterfaceTable_ApplicationTypes]
Types of applications that are allowed on the specific interface.
 [0] OAMP = Only Operations, Administration, Maintenance
and Provisioning (OAMP) applications (e.g., Web, Telnet,
SSH, and SNMP) are allowed on the interface.
 [1] Media = Only Media (i.e., RTP streams of voice) is
allowed on the interface.
 [2] Control = Only Call Control applications (e.g., SIP) are
allowed on the interface.
 [3] OAMP + Media = Only OAMP and Media applications
are allowed on the interface.
 [4] OAMP + Control = Only OAMP and Call Control
applications are allowed on the interface.
 [5] Media + Control = Only Media and Call Control
applications are allowed on the interface.
 [6] OAMP + Media + Control = All application types are
allowed on the interface.
Notes:
 A single OAMP interface (and only one) must be configured
and this must be of address type IPv4. This OAMP
interface can be combined with Media and Control
interfaces.
 At least one interface for Media traffic and at least one
interface for Control traffic must be configured. These
interfaces can be combined (i.e., Media + Control, or
OAMP + Media + Control).
 At least one IPv4 interface must be configured.