AudioCodes Mediant 800 MSBG - Table 3-10: SNMP V3 Users Parameters

SIP User's Manual 82 Document #: LTRT-12804
Mediant 800 MSBG
4. Click the Apply button to save your changes.
5. To save the changes, see ''Saving Configuration'' on page 336.
Notes:
• For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), see ''Working with Tables'' on page 53.
• You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (see ''SNMP Parameters'' on page 679).
Table 3-10: SNMP V3 Users Parameters
Parameter Description
Index
[SNMPUsers_Index]
The table index.
The valid range is 0 to 9.
User Name
[SNMPUsers_Username]
Name of the SNMP v3 user. This name must be unique.
Authentication Protocol
[SNMPUsers_AuthProtocol]
Authentication protocol of the SNMP v3 user.
 [0] None (default)
 [1] MD5
 [2] SHA-1
Privacy Protocol
[SNMPUsers_PrivProtocol]
Privacy protocol of the SNMP v3 user.
 [0] None (default)
 [1] DES
 [2] 3DES
 [3] AES-128
 [4] AES-192
 [5] AES-256
Authentication Key
[SNMPUsers_AuthKey]
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Privacy Key
[SNMPUsers_PrivKey]
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
Group
[SNMPUsers_Group]
The group with which the SNMP v3 user is associated.
 [0] Read-Only (default)
 [1] Read-Write
 [2] Trap
Note: All groups can be used to send traps.