SIP User's Manual 374 Document #: LTRT-12804
Mediant 800 MSBG
The MG Tree is a hierarchical tree-like structure that lists all the devices managed by EMS.
The tree includes the following icons:
Globe
: highest level in the tree from which a Region can be added.
Region
: defines a group (e.g., geographical location) to which devices can be
added. If you click a Region that is defined with devices (MG's), the Main pane (see
figure above) displays a list of all the devices pertaining to the Region.
MG
: defines the device. This is the lowest level in the tree. If you click an MG icon,
the Main pane (see figure above) displays a graphical representation of the device's
chassis.
5.2 Adding the Device in EMS
Once you have defined the IPSec communication protocol for communicating between
EMS and the device and configured the device's IP address (refer to the Installation
Manual), you can add the device in the EMS.
Adding the device to the EMS includes the following main stages:
a. Adding a Region
b. Defining the device's IP address (and other initial settings)
¾ To initially setup the device in EMS:
1. Start the EMS by double-clicking the shortcut icon
on your desktop, or from the
Start menu, point to Programs, point to EMS Client, and then click EMS Client; the
Login Screen appears:
Figure 5-2: EMS Login Screen
2. Enter your login username and password, the EMS server's IP address, and then click
OK.
To Next Page
Loading...
