SIP User's Manual 164 Document #: LTRT-12804
Mediant 800 MSBG
3.3.2.11.3 Routing
The Routing submenu allows you to configure call routing rules. This submenu includes
the following page items:
General Parameters (see ''Configuring General Routing Parameters'' on page 164)
Tel to IP Routing (see ''
Configuring Outbound IP Routing Table'' on page 165)
IP to Trunk G
roup Routing (see ''Configuring Inbound IP Routing Table'' on page 172)
Alternative Routing Rea
sons (see ''Configuring Alternative Routing Reasons'' on page
174)
Forward on B
usy Trunk (see ''Configuring Call Forward upon Busy Trunk'' on page
176)
3.3.2.11.3.1 Configuring General Routing Parameters
The 'Routing General Parameters' page allows you to configure general routing
parameters. For a description of these parameters, see ''Configuration Parameters
Reference'' on page 653.
¾ To configure general routing parameters:
1. Open the 'Routing General Parameters' page (Configuration tab > VoIP menu > GW
and IP to IP submenu > Routing submenu > General Parameters).
Figure 3-82: Routing General Parameters Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
To Next Page
Loading...
