SIP User's Manual 348 Document #: LTRT-12804
Mediant 800 MSBG
3.5.1.2 Viewing Ethernet Port Information
The 'Ethernet Port Information' page displays read-only information on the device's
Ethernet connection. This includes indicating the active port, duplex mode, and speed. You
can also access this page from the 'Home' page (see ''Using the Home Page'' on page 59).
For d
etailed information on the Ethernet interface configuration, see Ethernet Interface
Configuration.
¾ To view Ethernet port information:
Open the ‘Ethernet Port Information’ page (Status & Diagnostics tab > System
Status menu > Ethernet Port Information).
Figure 3-302: Ethernet Port Information Page
Table 3-42: Ethernet Port Information Parameters
Parameter Description
Active
Displays whether the port is active or not.
Speed
Displays the speed (in Mbps) of the Ethernet port.
Duplex Mode
Displays the whether the port is half- or full-duplex mode.
Power Over
Ethernet
Displays whether Power over Ethernet is active on the port.
3.5.1.3 Viewing WAN Port Information
The 'WAN Port Information' page displays read-only information on the device's WAN
connection. This information includes the type of WAN port (e.g., T1 or SHDSL) and
whether it is active or not.
To Next Page
Loading...
