SIP User's Manual 346 Document #: LTRT-12804
Mediant 800 MSBG
2. To load the Data configuration ini file to the device, perform the following:
a. Under the 'Send the Data Configuration file to the device' group, click the Browse
button, navigate to the folder in which the file is located, select the file, and then
click Open; the name and path of the file appear in the field beside the Browse
button.
b. Click the Send File button, and then at the prompt, click OK; the device uploads
the file and then resets (from the cmp version stored on the flash memory). Once
complete, the Login screen appears, requesting you to enter your user name and
password.
3.5 Status & Diagnostics Tab
The Status & Diagnostics tab on the Navigation bar displays menus in the Navigation tree
related to device operating status and diagnostics. These menus include the following:
System Status (see ''System Status'' on page 346)
VoIP Status (see ''V
oIP Status'' on page 350)
Data Status (see
Data Status on page 358)
3.5.1 System Status
The System Status menu is used to view and monitor the device's channels, Syslog
messages, hardware and software product information, and to assess the device's
statistics and IP connectivity information. This menu includes the following page items:
Device Information (see ''Viewing Device Information'' on page 346)
Ethernet Port
Information (see ''Viewing Ethernet Port Information'' on page 348)
WAN Po
rt Information (see Viewing WAN Port Information on page 348)
Active Alarms (see '
'Viewing Active Alarms'' on page 349)
3.5.1.1 Viewing Device Information
The 'Device Information' page displays the device's specific hardware and software product
information. This information can help you expedite troubleshooting. Capture the page and
e-mail it to AudioCodes Technical Support personnel to ensure quick diagnosis and
effective corrective action. This page also displays any loaded files used by the device
(stored in the RAM) and allows you to remove them.
To Next Page
Loading...
